3M 1860 N95 Respirator Mask- Corona virus protactive mask for doctor- big stock avialable

৳  255total price(Fixed)

Attention: This product is available for bulk purchase only. Minimum order quantity 1 Lac pieces. available 5 lac pcs

The 1860 and 1860S healthcare respirators are designed to
help provide respiratory protection for the wearer against
certain airborne particles. They meet CDC guidelines for
Mycobacterium tuberculosis exposure control. As disposable
particulate respirators, they are intended to reduce wearer
exposure to certain airborne particles including those
generated by electrocautery, laser surgery, and other
powered medical instruments. As surgical masks, they are
designed to be fluid resistant to splash and spatter of blood
and other infectious materials.
The 1860 and 1860S particulate respirators are personal
protective equipment (PPE) that are primarily intended to
protect the health care workers by reducing exposure to
harmful airborne particles which are small enough to be
inhaled – typically particles less than 100 microns in size.
These include airborne particles that may contain biological
material e.g. Bacillus anthracis, Mycobacterium tuberculosis,
mould and the virus that causes Severe Acute Respiratory
Syndrome (SARS), and Influenza.

• NIOSH approved N95 rating
• FDA cleared for use as a surgical mask
• Fluid Resistance 80 mmHg
• Flammability Rating Class I
• Adjustable nose clip
• Braided and stapled headbands
• Particulate Respirator and Surgical Mask

Use For
• Intended to be worn by operating room personnel during
surgical procedures to help protect both the surgical
patient and the operating room personnel from transfer of
microorganisms, body fluids, and particulate material.
• Always follow User Instructions and use in manners as

Do Not Use for
• DO NOT use in industrial settings
• DO NOT use for gases or vapours (i.e. anesthetic gases
such as isoflurane or vapours from sterilants such as
• DO NOT use in any manner not indicated in the User

Approvals and Standards
• NIOSH approved N95 respirator
• Meets NIOSH 42 CFR 84 N95 requirements for a
minimum 95% filtration efficiency against solid and liquid
aerosols that do not contain oil.
• NIOSH approval number: TC-84A-0006
• FDA cleared for use as a surgical mask
• Health Canada Class I medical device
• Bacterial Filtration Efficiency F2101 >99% BFE
• OSHA Assigned Protection Factor (APF) 10
• Australia TGA approved

Fitting Instructions
Must be followed each time the respirator is worn. Before
fitting device, ensure hands are clean.
See Figure 1 below.
All respirator components should be inspected for damage
prior to each use.
1. Cup respirator in one hand with nosepiece at fingertips,
allow headbands to hang freely below hand.
2. Hold respirator under chin, with nosepiece up.
3. Locate the upper strap across the crown of the head and
the lower strap below the ears.
4. Straps must not be twisted.
5. Using both hands, mould noseclip to the shape of the nose
to ensure a close fit and good seal. Pinching the noseclip
using only one hand may result in less effective respirator
6. The seal of the respirator on the face should be fit-checked
before entering the workplace.

Leave a Reply

Your email address will not be published. Required fields are marked *